PA Hot-Melt Adhesive film

Polyamide，PA）- PA hot melt adhesive film has a wide range of applications. This material not only has excellent water washing resistance, but also maintains excellent performance under dry cleaning conditions.PA hot melt adhesive film lacks elasticity, but can achieve excellent adhesion on various fabrics and leather surfaces. This unique bonding ability makes it widely used in clothing manufacturing and home textile industry,becoming an indispensable preferred auxiliary material both inside and outside the industry. In general, there are two melting points (80-110 ℃ and 115-128 ℃), which provide the possibility for precise bonding in different application scenarios and meet different processing needs.

Product type:  ?G0215   ?G0015

Applicable Bonding Materials : ?Textile fabric  ?Paper  ?Rubber  ?Genuine leather  ?Polymer film ?Sponge foam ?Timber board

Applicable Fields :  ?Clothing ?Car interior  ?Daily necessities  ?Home textile interior  ?Electronic field  ?Shoe Material Field

Characteristic:

?Transparent color, no elasticity

?Good adhesion to textiles and PI films

?Excellent dry cleaning resistance, good washing resistance

?It is not prone to yellowing and aging, and the molecular stability is good

Technical data:

********************************************************************

Reference Usgae:

Hot melt adhesive requires hot pressing bonding.

1. Glue two thin and flexible materials, stack (Material 1)/(Hot Melt Adhesive Film)/(Material 2) together, and use a flatbed hot melt bonding machine or flat bed hot melt bonding machine or iron for hot press bonding.The reference temperature is 15-20 degrees above the melting point of the substrate. For example, if the melting point of the mesh adhesive film is 115 degrees, the machine will set the hot press temperature to around 135 degrees and the pressure to 0.2 Mpa for 10 seconds. The specific pressing conditions need to be adjusted according to the actual situation of the customer.When bonding thick metal substrate materials, lay the adhesive(hot melt mesh or film) on the thick metal substrate material and bake them together in an oven at 140 ℃ -160 ℃. After complete melting, the two materialscan be bonded together, and the baking temperature can be adjusted according to the customer's actual situation.

2. Thinner metallic materials can also be pressed by a flat iron press, such as thin aluminum plates, thin copper plates, thin steel plates, etc., and bonded to non-woven fabrics.

Transportation and storage:

Hot melt adhesive film and hot melt adhesive mesh should be handled with care during transportation. Avoid sunlight, rain, high temperature, and high pressure. It is prohibited to use iron hooks for lifting during the loading process

Unload to ensure the packaging is intact and undamaged. Store in a cool, ventilated, dry place with a temperature of 0-30 ℃ (humidity ≤ 70% RH), away from high temperatures, and the stacking height should not exceed 3 layers.

Shelf life: 12-24 months from the date of production.